Features and Applications:
※Medium wall cross-linked polyolefin
※Mastic coating
※Excellent corrosion protection properties
※Excellent bonding to both metal and wood
※UV resistant
※Operating temp.: -35°C to +110°C
※Min. full recovery temp.: 120°C

Part No.	Size (mm)	As Supplied(mm)	After Recovered (mm)		Standard Length(mm)
		D(Min.)	d(Max.)	w(Min.)
D011101	BS09-30/6	30	6	2.5	1000-1500
D011102	BS09-33/8	33	8	2.5	1000-1500
D011103	BS09-40/12	40	12	2.5	1000-1500
D011104	BS09-55/20	55	20	2.0	1000-1500
D011105	BS09-75/25	75	25	2.0	1000-1500
D011106	BS09-95/30	95	30	2.0	1000-1500
D011107	BS09-120/40	120	40	2.0	1000-1500
D011108	BS09-140/50	140	50	2.3	1000-1500
D011109	BS09-160/50	160	50	2.3	1000-1500
D011110	BS09-180/66	180	66	2.5	1000-1500
D011111	BS09-205/66	205	66	2.5	1000-1500
D011112	BS09-235/70	235	70	2.5	1000-1500
D011113	BS09-265/75	265	75	3.0	1000-1500
D011114	BS09-300/85	300	85	3.0	1000-1500

*D = Inner Diameter as supplied d = Inner Diameter after recovered
w = Wall Thickness after fully recovered

Technical properties:

	Test Method	Typical Data
Property of jacket
Tensile strength	ASTM D 2671	≥14 MPa
Ultimate elongation	ASTM D 2671	≥400%
Heat aging tensile strength Ultimate elongation	ASTM D 2671 150℃, 168hr.	>12MPa >300%
Density	ASTM D 792	1.05g/cm3
Longitudinal shrinkage	UL 224	0 to -10%
Dielectric strength	IEC 243	≥18kV/mm
Volume resistance	IEC 93	≥1013Ω*cm
Eccentricity	ASTM D 2671	<40%
Copper stability	ASTM D 2671	Pass
Water absorption	ISO 62/23℃,14days	<0.15%
Property of adhesive
Water absorption	ISO 62	<0.2%
Softening point	ASTM E28	85±5℃
Resistance to fungus and decay	ISO 846	Pass

Standard Colors:
※Black
Packaging:
※Special: 1.0m, 1.22m, 1.5m pieces are available on request.
※Other cut lengths are available, please contact us.