Heat Shrinkable 2:1 Shrink Ratio Non Flame Retardant Polyolefin Thin Wall Tubings
DESCRIPTION
Features and Applications:
※BS-20 is commercial grade heat shrinking tubing for general applications where flame-retardant properties are not needed, but electrical insulation and mechanical performance is important.
※Clear version offers exceptional clarity.
※Minimum shrink temperature: 80°C
※Minimum fully recovery temperature: 100°C
※Standard color: Black, Transparent, Yellow, Red, Blue, White, Other colors available on request
| Part No. | Normal Size | As Supplied | After Recovered (mm) | Spool Length (m/spool) |
|
| inch | Inside Diameter (Min.) |
Inside Diameter (Max.) |
Wall Thickness (Nom.) |
||
| D012301 | 3/64 | 1.2 | 0.6 | 0.33 | 200 |
| D012302 | 1/16 | 1.6 | 0.8 | 0.36 | 200 |
| D012303 | 3/32 | 2.4 | 1.2 | 0.44 | 200 |
| D012304 | 1/8 | 3.2 | 1.6 | 0.44 | 200 |
| D012305 | 3/16 | 4.8 | 2.4 | 0.56 | 100 |
| D012306 | 1/4 | 6.4 | 3.2 | 0.56 | 100 |
| D012307 | 5/16 | 8.0 | 4.0 | 0.56 | 100 |
| D012308 | 3/8 | 9.5 | 4.8 | 0.56 | 100 |
| D012309 | 1/2 | 12.7 | 6.4 | 0.65 | 50 |
| D012310 | 5/8 | 16.0 | 8.0 | 0.69 | 50 |
| D012311 | 3/4 | 19.1 | 9.5 | 0.80 | 50 |
| D012312 | 1 | 25.4 | 12.7 | 0.90 | 50 |
| D012313 | 1 1/4 | 31.8 | 15.9 | 0.90 | 50 |
| D012314 | 1 1/2 | 38.1 | 19.1 | 1.02 | 50 |
| D012315 | 2 | 50.8 | 25.4 | 1.02 | 50 |
| D012316 | 3 | 76.2 | 38.1 | 1.02 | 30 |
| Part No. | Normal Size | As Supplied | After Recovered (mm) | Spool Length (m/spool) |
|
| (mm) | Inside Diameter (Min.) |
Inside Diameter (Max.) |
Wall Thickness (Nom.) |
||
| D012401 | 1.0 | 1.0 | 0.5 | 0.33 | 200 |
| D012402 | 1.5 | 1.5 | 0.75 | 0.36 | 200 |
| D012403 | 2.0 | 2.0 | 1.0 | 0.44 | 200 |
| D012404 | 2.5 | 2.5 | 1.25 | 0.44 | 200 |
| D012405 | 3.0 | 3.0 | 1.5 | 0.44 | 200 |
| D012406 | 3.5 | 3.5 | 1.75 | 0.44 | 200 |
| D012407 | 4.0 | 4.0 | 2.0 | 0.44 | 200 |
| D012408 | 5.0 | 5.0 | 2.5 | 0.56 | 100 |
| D012409 | 6.0 | 6.0 | 3.0 | 0.56 | 100 |
| D012410 | 7.0 | 7.0 | 3.5 | 0.56 | 100 |
| D012411 | 8.0 | 8.0 | 4.0 | 0.56 | 100 |
| D012412 | 9.0 | 9.0 | 4.5 | 0.56 | 100 |
| D012413 | 10.0 | 10.0 | 5.0 | 0.56 | 100 |
| D012414 | 11.0 | 11.0 | 5.5 | 0.56 | 100 |
| D012415 | 12.0 | 12.0 | 6.0 | 0.56 | 50 |
| D012416 | 13.0 | 13.0 | 6.5 | 0.65 | 50 |
| D012417 | 14.0 | 14.0 | 7.0 | 0.69 | 50 |
| D012418 | 15.0 | 15.0 | 7.5 | 0.69 | 50 |
| D012419 | 16.0 | 16.0 | 8.0 | 0.69 | 50 |
| D012420 | 18.0 | 18.0 | 9.0 | 0.80 | 50 |
| D012421 | 20.0 | 20.0 | 10.0 | 0.80 | 50 |
| D012422 | 22.0 | 22.0 | 11.0 | 0.80 | 50 |
| D012423 | 25.0 | 25.0 | 12.5 | 0.9 | 50 |
| D012424 | 28.0 | 28.0 | 14.0 | 0.9 | 50 |
| D012425 | 30.0 | 30.0 | 15.0 | 0.9 | 50 |
| D012426 | 35.0 | 35.0 | 17.5 | 0.9 | 50 |
| D012427 | 40.0 | 40.0 | 20.0 | 1.0 | 50 |
| D012428 | 50.0 | 50.0 | 25.0 | 1.0 | 50 |
| D012429 | 60.0 | 60.0 | 30.0 | 1.0 | 50 |
Technical properties:
| Property | Test Method | Typical Data |
| Operating temperature | UL 224 | -55 to ++105℃ |
| Tensile strength | ASTM D 2671 | >10.4MPa |
| Elongation at break | ASTM D 2671 | >500% |
| Longitudinal shrinkage | UL 224 | +/- 5% |
| Eccentricity | ASTM D 2671 | <30% |
| Flammability | VW-1 | Pass |
| Dielectric strength | IEC243 | >20kV/mm |
| Volume resistance | IEC 93 | >1014 Ω.cm |
| Copper stability | UL224 | Pass |
