Features and Applications:
※Medium wall tubing with adhesive
※Good environmental protection
※Good electrical & mechanical performance
※Ideal for LV applications
※UV resistant
※Operating temp.: -55°C to +110°C
※Min. full recovery temp.: 120°C

Part No.		Size (mm)	As Supplied(mm)	After Recovered (mm)		Standard Length(mm)
BS-01A	BS-01B		D(Min.)	d(Max.)	w(Min.)
D010101	D010201	BS01-8/2	8	2	1.7	1000-1500
D010102	D010202	BS01-12/3	12	3	1.8	1000-1500
D010103	D010203	BS01-16/5	16	5	2.2	1000-1500
D010104	D010204	BS01-22/6	22	6	2.5	1000-1500
D010105	D010205	BS01-28/6	28	6	2.5	1000-1500
D010106	D010206	BS01-33/8	33	8	2.5	1000-1500
D010107	D010207	BS01-40/12	40	12	2.5	1000-1500
D010108	D010208	BS01-55/16	55	16	2.7	1000-1500
D010109	D010209	BS01-65/19	65	19	2.8	1000-1500
D010110	D010210	BS01-75/22	75	22	3.0	1000-1500
D010111	D010211	BS01-85/25	85	25	3.0	1000-1500
D010112	D010212	BS01-95/25	95	25	3.0	1000-1500
D010113	D010213	BS01-115/34	115	34	3.3	1000-1500
D010114	D010214	BS01-140/42	140	42	3.5	1000-1500
D010115	D010215	BS01-160/50	160	50	3.5	1000-1500
D010116	D010216	BS01-180/58	180	58	3.5	1000-1500
D010117	D010217	BS01-205/65	205	65	4.0	1000-1500
D010118	D010218	BS01-235/65	235	65	4.0	1000-1500
D010119	D010219	BS01-265/75	265	75	4.0	1000-1500
D010120	D010220	BS01-300/75	300	75	4.0	1000-1500
D010121	D010221	BS01-350/100	350	100	4.3	1000-1500
D010122	D010222	BS01-380/150	380	150	4.3	1000-1220
D010123	D010223	BS01-410/150	410	150	4.3	1000-1220

*D = Inner Diameter as supplied d = Inner Diameter after recovered
w = Wall Thickness after fully recovered

Technical properties:

	Test Method	Typical Data
Property of jacket
Tensile strength	ASTM D 2671	≥14 MPa
Ultimate elongation	ASTM D 2671	≥400%
Heat aging tensile strength Ultimate elongation	ASTM D 2671 150℃, 168hr.	>12MPa >300%
Density	ASTM D 792	1.05g/cm3
Longitudinal shrinkage	UL 224	0 to -10%
Dielectric strength	IEC 243	≥18kV/mm
Volume resistance	IEC 93	≥1013Ω*cm
Eccentricity	ASTM D 2671	<40%
Copper stability	ASTM D 2671	Pass
Water absorption	ISO 62/23℃,14days	<0.15%
Property of adhesive
Water absorption	ISO 62	<0.2%
Softening point	ASTM E28	85±5℃
Peel strength (PE)	DIN 30672	4 N/cm
Resistance to fungus and decay	ISO 846	Pass

Standard Colors:
※Black
Ordering Information:
※Dimensions of adhesive lined and non adhesive lined tubings are same.
※BS-01A is with adhesive and BS-01B is without adhesive.
Packaging:
※Standard packaging 1.0m, 1.22m, 1.50m pieces are available on request.
※BS-01B is available in 30meters/spool up to size 75/22.
※Other cut lengths are available, please contact us.