Features and Applications:
※Heavy wall tubing with adhesive
※Superior electrical & environmental insulation
※Excellent abrasion and impact resistance
※UV resistant
※Superior sealing property
※Operating temp.: -55°C to +110°C
※Min. full recovery temp.: 120°C

Part No.		Size (mm)	As Supplied(mm)	After Recovered (mm)		Standard Length(mm)
BS-02A	BS-02B		D(Min.)	d(Max.)	w(Min.)
D010301	D010401	BS02-9/3	9	3	1.8	1000-1500
D010302	D010402	BS02-15/4	15	4	2.4	1000-1500
D010303	D010403	BS02-22/6	22	6	2.7	1000-1500
D010304	D010404	BS02-33/8	33	8	3.2	1000-1500
D010305	D010405	BS02-40/12	40	12	4.1	1000-1500
D010306	D010406	BS02-45/12	45	12	4.1	1000-1500
D010307	D010407	BS02-55/16	55	16	4.1	1000-1500
D010308	D010408	BS02-75/22	75	22	4.1	1000-1500
D010309	D010409	BS02-85/25	85	25	4.3	1000-1500
D010310	D010410	BS02-95/30	95	30	4.3	1000-1500
D010311	D010411	BS02-105/30	105	30	4.3	1000-1500
D010312	D010412	BS02-115/34	115	34	4.3	1000-1500
D010313	D010413	BS02-130/36	130	36	4.3	1000-1500
D010314	D010414	BS02-160/50	160	50	4.3	1000-1500
D010315	D010415	BS02-180/50	180	50	4.3	1000-1500
D010316	D010416	BS02-200/60	200	60	4.3	1000-1500
D010317	D010417	BS02-235/65	235	65	4.5	1000-1500
D010318	D010418	BS02-265/75	265	75	4.5	1000-1500
D010319	D010419	BS02-300/85	300	85	4.5	1000-1500
D010320	D010420	BS02-350/100	350	100	4.5	1000-1500

*D = Inner Diameter as supplied d = Inner Diameter after recovered
w = Wall Thickness after fully recovered

Technical properties:

	Test Method	Typical Data
Property of jacket
Tensile strength	ASTM D 2671	≥14 MPa
Ultimate elongation	ASTM D 2671	≥400%
Heat aging tensile strength Ultimate elongation	ASTM D 2671 150℃, 168hr .	>12MPa >300%
Density	ASTM D 792	1.05g/cm3
Longitudinal shrinkage	UL 224	0 to -10%
Dielectric strength	IEC 243	≥18kV/mm
Volume resistance	IEC 93	≥1013Ω*cm
Eccentricity	ASTM D 2671	<40%
Copper stability	ASTM D 2671	Pass
Water absorption	ISO 62/23℃,14days	<0.15%
Property of adhesive
Water absorption	ISO 62	<0.2%
Softening point	ASTM E28	85±5℃
Peel strength (PE)	DIN 30672	4 N/cm
Resistance to fungus and decay	ISO 846	Pass

Standard Colors:
※Black
Ordering Information:
※Dimensions of adhesive lined and non adhesive lined tubings are same.
※BS-02A is with adhesive and BS-02B is without adhesive.
Packaging:
※Standard packaging 1.0m, 1.22m; 1.50m pieces are available on request
※BS-02B is available in 30meters/spool up to size 55/16.
※Other cut lengths are available, please contact us.