Features and Applications:
※Medium wall adhesive lined
※Cross-linked polyolefin
※Good sealing & electrical properties
※Excellent mechanical performance
※Flame retardant
※UV and weather resistance
※Operating temp.: -55°C to +110°C
※Min. full recovery temp.: 120°C

Part No.	Size (mm)	As Supplied(mm)	After Recovered (mm)		Standard Length(mm)
		D(Min.)	d(Max.)	w(Min.)
D010601	BS04-22/6	22	6	2.5	1000-1500
D010602	BS04-33/8	33	8	2.5	1000-1500
D010603	BS04-40/12	40	12	2.5	1000-1500
D010604	BS04-55/16	55	16	2.7	1000-1500
D010605	BS04-65/19	65	19	2.8	1000-1500
D010606	BS04-75/22	75	22	3.0	1000-1500
D010607	BS04-95/25	95	25	3.0	1000-1500
D010608	BS04-115/34	115	34	3.0	1000-1500
D010609	BS04-140/42	140	42	3.0	1000-1500
D010610	BS04-160/50	160	50	3.0	1000-1500
D010611	BS04-180/58	180	58	3.0	1000-1500
D010612	BS04-200/65	200	65	3.0	1000-1500
D010613	BS04-235/65	235	65	3.0	1000-1500
D010614	BS04-265/75	265	75	3.0	1000-1500
D010615	BS04-300/85	300	85	3.0	1000-1500

*D = Inner Diameter as supplied d = Inner Diameter after recovered
w = Wall Thickness after fully recovered

Technical properties:

	Test Method	Typical Data
Property of jacket
Tensile strength	ASTM D 2671	≥14 MPa
Ultimate elongation	ASTM D 2671	≥400%
Heat aging tensile strength Ultimate elongation	ASTM D 2671 150℃, 168hr .	>12MPa >300%
Density	ASTM D 792	1.25g/cm3
Longitudinal shrinkage	UL 224	0 to -10%
Dielectric strength	IEC 243	≥18kV/mm
Volume resistance	IEC 93	≥1013Ω*cm
Eccentricity	ASTM D 2671	<40%
Flammability	–	Self extinguish in 60 sec.
Property of adhesive
Water absorption	ISO 62	<0.2%
Softening point	ASTM E28	85±5℃
Peel strength (PE)	DIN 30672	4 N/cm
Resistance to fungus and decay	ISO 846	Pass

Standard Colors:
※Black
Packaging:
※Standard packaging 1.0m; 1.22m; 1.5m pieces are available on request
※Other cut lengths are available, please contact us.