• Insulation Piercing Connectors BARE SERVICE

Insulation Piercing Connectors BARE SERVICE

DESCRIPTION

Applications
※This connector is used for connecting the insulated service conductors to the low voltage overhead bare conductor network.

Features
※Tightening of the bare main conductor and piercing of the tap conductor are carried out simultaneously in a single tightening operation.
※The tightening screw is potential free.
※Tightening efficiency is ensured by a shear head screw.
※The connector end cap is flexible so that to feel good tap conductor insertion simply by hand. It is carrying grease, granting water-tightness around tap conductor end on long terms basis. It is linked on connector body so that to avoid eventual loss during handling, installation and environment (wind, wild life…).
※This connector is according to the criteria of NF C 33-020 and EN 50-483.

Implementation
• Insert the insulated tap conductor into the connector so that its end seats in the flexible end cap.
• Use a spanner and tighten the connector on the bare main conductor until the shear head breaks.
• The permanent screw head is only provided for possible dismantling, and must not be used to re-tighten the screw after the first head has broken.
• Implementation can be carried out on a live line but with no load on the tap conductor.

Part No. Item Mains Insulated
Al-Cu mm²
Tap Insulated
Al-Cu mm²
Number of Bolts
B010107 IPCN 7-100/6-35 7-100 6-35 1