• Heat Shrinkable Heavy Wall Tubings

Heat Shrinkable Heavy Wall Tubings

DESCRIPTION

Features and Applications:
※Heavy wall tubing with adhesive
※Superior electrical & environmental insulation
※Excellent abrasion and impact resistance
※UV resistant
※Superior sealing property
※Operating temp.: -55°C to +110°C
※Min. full recovery temp.: 120°C

Part No. Size (mm) As Supplied(mm) After Recovered (mm) Standard Length(mm)
BS-02A BS-02B D(Min.) d(Max.) w(Min.)
D010301 D010401 BS02-9/3 9 3 1.8 1000-1500
D010302 D010402 BS02-15/4 15 4 2.4 1000-1500
D010303 D010403 BS02-22/6 22 6 2.7 1000-1500
D010304 D010404 BS02-33/8 33 8 3.2 1000-1500
D010305 D010405 BS02-40/12 40 12 4.1 1000-1500
D010306 D010406 BS02-45/12 45 12 4.1 1000-1500
D010307 D010407 BS02-55/16 55 16 4.1 1000-1500
D010308 D010408 BS02-75/22 75 22 4.1 1000-1500
D010309 D010409 BS02-85/25 85 25 4.3 1000-1500
D010310 D010410 BS02-95/30 95 30 4.3 1000-1500
D010311 D010411 BS02-105/30 105 30 4.3 1000-1500
D010312 D010412 BS02-115/34 115 34 4.3 1000-1500
D010313 D010413 BS02-130/36 130 36 4.3 1000-1500
D010314 D010414 BS02-160/50 160 50 4.3 1000-1500
D010315 D010415 BS02-180/50 180 50 4.3 1000-1500
D010316 D010416 BS02-200/60 200 60 4.3 1000-1500
D010317 D010417 BS02-235/65 235 65 4.5 1000-1500
D010318 D010418 BS02-265/75 265 75 4.5 1000-1500
D010319 D010419 BS02-300/85 300 85 4.5 1000-1500
D010320 D010420 BS02-350/100 350 100 4.5 1000-1500

*D = Inner Diameter as supplied d = Inner Diameter after recovered
w = Wall Thickness after fully recovered

Technical properties:

Test Method Typical Data
Property of jacket
Tensile strength ASTM D 2671 ≥14 MPa
Ultimate elongation ASTM D 2671 ≥400%
Heat aging tensile strength Ultimate elongation ASTM D 2671
150℃, 168hr .
>12MPa
>300%
Density ASTM D 792 1.05g/cm3
Longitudinal shrinkage UL 224 0 to -10%
Dielectric strength IEC 243 ≥18kV/mm
Volume resistance IEC 93 ≥1013Ω*cm
Eccentricity ASTM D 2671 <40%
Copper stability ASTM D 2671 Pass
Water absorption ISO 62/23℃,14days <0.15%
Property of adhesive
Water absorption ISO 62 <0.2%
Softening point ASTM E28 85±5℃
Peel strength (PE) DIN 30672 4 N/cm
Resistance to fungus and decay ISO 846 Pass

Standard Colors:
※Black
Ordering Information:
※Dimensions of adhesive lined and non adhesive lined tubings are same.
※BS-02A is with adhesive and BS-02B is without adhesive.
Packaging:
※Standard packaging 1.0m, 1.22m; 1.50m pieces are available on request
※BS-02B is available in 30meters/spool up to size 55/16.
※Other cut lengths are available, please contact us.